CAMBURG ENGINEERING CAM-310187-GRY Performance Billet Upper 888563187334 Arms V2 Control

( Brand: Camburg Engineering ), ( Manufacturer Part Number: CAM-310187-GRY ), ( Part Type: Control Arm ), ( Surface Finish: Grey ), ( California Prop 65 Warning: Yes ), ( Country Of Origin: Usa ), ( UPC: 888563187334 )

Review CAMBURG ENGINEERING V2 Performance Billet Uniball Upper Control Arms Grey fits TUNDRA 2007–2022

The **Camburg Engineering CAM-310187-GRY 2007-2022 Toyota Tundra (V2) Performance Billet Upper Control Arm** is a meticulously engineered, high-performance suspension component designed to elevate the handling, stability, and durability of Toyota s iconic full-size pickup truck. Crafted from premium **7075-T6 aluminum billet**, this upper control arm is forged to exacting standards, ensuring an optimal balance of strength, weight savings, and precision engineering. The billet construction eliminates the inherent weaknesses found in stamped steel arms, providing superior resistance to fatigue, warping, and corrosion critical advantages for drivers who demand relentless performance, whether hauling heavy loads, towing substantial trailers, or pushing the limits on rough terrain. The arm features a **sleek, aerodynamic gray powder-coat finish**, not only enhancing its visual appeal but also offering robust protection against abrasion, UV degradation, and environmental elements, ensuring long-term durability without the need for additional sealants or coatings.

At the core of its design is **Camburg s proprietary geometry**, meticulously calibrated to match or exceed OEM specifications while incorporating subtle refinements for improved articulation, reduced binding, and enhanced steering responsiveness. The arm is equipped with **high-quality, corrosion-resistant hardware**, including **Grade 8 or higher bolts and bushings** (depending on application), which are precision-machined to fit seamlessly with the truck s suspension system. For those seeking even greater performance, the arm is engineered to accommodate **aftermarket polyurethane or rubber bushings**, allowing for customizable damping characteristics tailored to specific driving conditions whether it s the firmness needed for aggressive off-roading or the plush compliance required for highway cruising. The **clean, minimalist mounting points** ensure easy installation, with no unnecessary flanges or obstructions that could complicate fitment or maintenance, making it an ideal upgrade for both DIY enthusiasts and professional mechanics.

Beyond its technical superiority, this control arm is a testament to Camburg s commitment to quality and innovation in the aftermarket suspension industry. Whether integrated into a full suspension rebuild or as part of a targeted performance upgrade, the **CAM-310187-GRY** delivers measurable improvements in cornering stability, suspension travel, and overall drivability. By reducing unsprung weight and minimizing flex under load, it helps maintain tire contact with the road, improving traction and reducing wear on tires and other suspension components. For the discerning owner of a Toyota Tundra V2 who seeks to push the boundaries of their truck s capabilities without compromising on reliability, this billet upper control arm represents a premium investment in both performance and longevity.

### **Pros and Cons of buying a Camburg Engineering CAM-310187-GRY (2007 2022 Tundra V2 Performance Billet Upper Control Arms)**

1. **Improved Handling and Stability** Billet steel construction reduces flex and weight compared to stock cast arms, enhancing cornering precision and reducing body roll. This is particularly beneficial for off-road use, towing, or aggressive driving.

2. **Durability and Strength** Billet steel is significantly stronger than cast iron, reducing the risk of warping, cracking, or failure under heavy loads or rough terrain. It also resists corrosion better than some aftermarket alternatives.

3. **Compatibility with Performance Upgrades** The V2 Tundra is a popular platform for off-road and towing modifications. These control arms are designed to work well with lifted suspensions, aftermarket shocks, and heavy-duty axles, making them a versatile choice for builders.

4. **Better Alignment Retention** Billet arms maintain alignment longer than stock or cheaper aftermarket parts, reducing the need for frequent adjustments and saving labor costs over time.

5. **Positive Brand Reputation** Camburg is a well-known manufacturer in the off-road and performance aftermarket, with a track record of producing reliable, high-quality suspension components. Their parts are often recommended by mechanics and enthusiasts.

6. **Easier Installation** While still requiring some mechanical skill, these arms are designed with modern fitment in mind, reducing the need for extensive modifications to the vehicle s frame or bushings.

7. **Aesthetic Appeal** The polished or powder-coated finish (depending on the model) gives the vehicle a more customized, high-end look compared to stock components.

8. **Warranty and Support** Camburg offers warranties on their products, and their customer service is generally responsive, which can be reassuring for buyers investing in a high-quality part.

---

1. **Higher Upfront Cost** Billet control arms are significantly more expensive than stock or budget aftermarket options. For example, these arms will likely cost **$300 $500 per side**, depending on additional features (e.g., bushings, hardware). This can be a substantial investment if you re on a tight budget.

2. **Requires Professional Installation (Recommended)** While possible for experienced DIYers, these arms often require **specialized tools, torque specifications, and alignment adjustments** post-installation. Improper installation can lead to premature wear, alignment issues, or even damage to the vehicle. Many buyers opt for professional installation, adding to the cost.

3. **Bushing Compatibility** Some versions of these arms may require **aftermarket bushings** (e.g., polyurethane or rubber) for optimal performance. If the wrong bushings are used, it can lead to excessive wear or poor handling. Buyers must research or consult with a professional to ensure proper bushing selection.

4. **Potential for Overkill** If you re not heavily towing, off-roading, or modifying your Tundra aggressively, these arms may offer **marginal benefits** over stock or mid-range aftermarket parts. For daily drivers or light use, the cost may not justify the upgrade.

5. **Weight Consideration** While billet steel is strong, it is also **heavier than cast arms**. This added weight can slightly impact fuel efficiency and acceleration, though the difference is usually negligible unless you re running extreme modifications.

6. **Limited Customization** Unlike some aftermarket brands, Camburg offers fewer color or finish options for these specific arms. The "GRY" (gray) model is the standard, so buyers are limited in aesthetic choices.

7. **Potential for Misalignment if Not Installed Correctly** If the arms are not properly torqued or aligned after installation, it can lead to **uneven tire wear, steering issues, or premature bushing failure**. This risk underscores the importance of professional installation.

8. **Availability and Lead Times** Like many high-quality aftermarket parts, these may not be in stock immediately. Buyers should check inventory or order early to avoid delays.

---

The Camburg Engineering billet upper control arms are a **high-quality, durable, and performance-focused upgrade** for the 2007 2022 Tundra V2, particularly for those engaged in **off-roading, towing, or aggressive driving**. They offer **superior strength, better handling, and long-term reliability** compared to stock or cheaper alternatives. However, the **higher cost, installation complexity, and potential overkill for mild applications** make them a **better fit for serious modifiers rather than casual drivers**.

If you re planning **heavy-duty use, lifting, or a full suspension rebuild**, these arms are an excellent investment. For **daily drivers or light modifications**, a more budget-friendly aftermarket option (e.g., Fox, Bilstein, or even stock with upgraded bushings) may suffice.

---

- You re **lifting your Tundra** (2 4 inches or more) and need a strong, flexible solution.

- You **tow frequently** or carry heavy loads, and want to prevent suspension sag or failure.

- You re **building a high-performance or off-road rig** and want the best possible handling and durability.

- You re willing to **invest in professional installation** to ensure proper fitment and alignment.

- You re on a **tight budget** and only need a modest upgrade (e.g., Fox or Bilstein aftermarket arms).

- You re a **DIYer with limited experience** and aren t comfortable with suspension modifications.

- Your primary use is **daily driving with minimal off-roading or towing**.

**Final Verdict:** These are one of the **best billet control arm options** for the Tundra V2, but they re **not for everyone**. Weigh the benefits against your budget and needs before purchasing. If you decide to go forward, **prioritize professional installation** to maximize their performance and longevity.

Details:

Highly recommend. Constructed from high-strength billet aluminum for maximum durability. Shipping Handling: Quick Dispatch Orders ship fast usually same day. Safe Packaging Carefully packed with quality materials.

Crafted from high-strength billet aluminum, these upper control arms provide superior durability and articulation, making them the perfect enhancement for lifted suspensions off-road adventures. List below covers common applications. Experience improved geometry and handling that will elevate your driving experience both on off the road. Verified Buyer Helpful team answered all my fitment questions before I ordered.

Designed specifically for 2007 2022 Toyota Tundra model's. Weighs 24.25 lbs, providing a robust yet lightweight solution. Verified Buyer Great communication, exactly what I needed, and shipped quickly. Features uniball joints that enhance articulation and performance.

Year: Make: model: Trim: 2007 -2022ToyotaTundraAll. Verified Buyer MyTires4Less Driven by Service. Fitment Support Our team is here to help you get the right part first time.

part #: cam310187 prices

• $1649.00-$1749.00

specifications accperformanc:

• for models: Tundra
• for years: 2007-2022
• brand: Camburg Engineering
• mpn: Cam-310187-gry
• part type: Control Arm
• surface finish: Grey
• california prop 65 warning: Yes
• country of origin: Usa
• upc: 888563187334

seller accperformanc:

• city: Montpelier, Virginia
• # reviews: 729
• rating: 98.7%

returns accperformanc:

• time: 30 Days
• paid by: Seller
• policy: Returns Accepted

shipping accperformanc:

• transit: 3-9 Days
• cost: $0.00
• class: Standard, Expedited
• service: Standard, USPS Priority Mail, Expedited, FedEx 2Day
• carrier: USPS, FedEx
• type: Fixed

payments accperformanc:

• other
• wallet: Google-pay
• credit card: Visa

general accperformanc:

• Parts Accessories > Permance Racing Parts > Accessories
• condition: New

offer accperformanc:

• sold: 0
• availability: In Stock
• started: June 2, 2026
• options: Ship-to-home
• quantity: 5

Camburg Engineering CAM-310187 Is Similar To:

• Camburg Engineering Cam-310194-blu 2022 Toyota Land Cruiser 300 Billet Uniball Upper Control Arms Blue (74.4% similar) Precision machined from high-strength billet aluminum for unmatched durability. Safe packaging carefully packed with quality materials. Ideal for aggressive driving and lifted applications, ensuring reliability on rugged terrains. Highly recommend. Uniball design enhances articulation, improving off...(May 26th, 2026)